Futaba 8FG 2.4GHz FASST FAQ

Radio System FAQ

How do I setup Dual Rates on my 8FG?

To set up dual rates, go to Dual Rate screen in the Model menu. Drop down one space where you will see the selection for the surfaces you are going to setup. Touch RTN and scroll until you see have the Ail, Ele, or Rudder that you are wanting to set up.

At the bottom of your screen you will see an arrow pointing to the number 1. This will be your first rate or the AFR. This is what you would have already set in the End Point screen in the Linkage menu.

Scroll over once until you highlight the space below number 2. This is your switch selection point. Press RTN and go into the switch selection screen. You set this to the switch of your choice.

Back out of this screen by tapping RTN twice.

While you are at the Dual Rate menu page, move the switch you selected to the center or down position, you will then scroll up to the rates and with the switch still in the center or down position, change these rates as desired.

Now you have your AFR's position as full throw, bottom is low throw or dual rates on that control surface.